| |
Testing methods for industrial water and industrial wastewater－Part5：Microbiological and Biological methods |
|
1 |
|
Japan Environmental Management Association For Industry |
a |
| |
Steel cord conveyor belts－Longitudinal traction test－Part2:Mesurement of tensile strength |
|
1 |
|
The Japan Belting Manufacturers Association |
a |
| |
Steel cord conveyor belts－Cord-to-coating bond test－Initial test and after thermal treatment
|
|
1 |
|
The Japan Belting Manufacturers Association |
a |
| |
Steel cord conveyor belts－Methods for the determination of total thickness and cover thickness
|
|
1 |
|
The Japan Belting Manufacturers Association |
a |
| |
Steel cord conveyor belts－Adhesion strength test of the cover to the core layor
|
|
1 |
|
The Japan Belting Manufacturers Association |
a |
| |
Sodium hydroxide for industrial use－Part 3 : Determination of chloride－Section 3 : Potentiometric method, Coulometric Titration method |
|
1 |
|
Japan Soda Industry Association |
a |
| |
Rubber, vulcanized or thermoplastic - Determination of abrasion resistance - Part 4: Improved Lambourn test machine |
|
1 |
|
The Japan Rubber Manufacturers Association |
a |
| |
Rubber, vulcanized or thermoplastic - Determination of abrasion resistance - Part 5: Driven, vertical abrasive disc type abrasion machine |
|
1 |
|
The Japan Rubber Manufacturers Association |
a |
| |
Rubber, vulcanized or thermoplastic - Determination of abrasion resistance - Part 6: Other abrasion machine |
|
1 |
|
The Japan Rubber Manufacturers Association |
a |
| |
Rubber, vulcanized or thermoplastic-Determination of abrasion resistance-Part3:Rotating cylindrical drum device type abrasion machine |
|
1 |
|
The Japan Rubber Manufacturers Association |
a |
| |
Rubber, vulcanized-Quantitative analysis methods for volatilized sulfur and sulfur compounds under heating conditions-Part 1: Sulfur |
|
1 |
|
The Japan Rubber Manufacturers Association |
a |
| |
Rubber, vulcanized-Quantitative analysis methods for volatilized sulfur and sulfur compounds under heating conditions-Part 2: Sulfur compounds |
|
1 |
|
The Japan Rubber Manufacturers Association |
a |
| K0102-4 |
Testing methods for industrial water and industrial wastewater-Part 4: Organic substances |
13.060.50;13.060.25;13.060.30 |
3 |
ISO 6439,ISO 14402,ISO 16265 |
Japan Environmental Management Association For Industry |
a |
| K7201-4 |
Plastics-Determination of burning behaviour by oxygen index-Part 4: High gas velocity test |
13.220.40;83.080.01 |
5 |
ISO 4589-4 |
The Japan Plastics Industry Federation |
a |
| K7253 |
Plastics-Determination of abrasive wear by reciprocating linear sliding motion |
83.080.01 |
5 |
ISO 20329 |
The Japan Plastics Industry Federation |
a |
