| |
High-pressure rubber hoses and low-pressure rubber hoses with fitting bracket for liquefied petroleum gas |
|
1 |
|
Japan Lp-Gas Instruments Manufacture'S Association |
a |
| |
Safety of machinery - Application of protective equipment to detect the presence of persons |
|
1 |
|
The Japan Machinery Federation |
a |
| |
Unmanned Aircraft - Desine Management |
|
1 |
|
Japan Uav Association |
a |
| |
Messages and protocols for cooperation among manufacturing systems |
|
1 |
|
Advanced Planning and Schedulimg Organization for Manufacturing |
a |
| |
Plastics and rubber machines - Injection moulding machines - Safety requirements |
|
1 |
|
The Japan Society Of Industrial Machinery Manufacturers |
a |
| |
Fine bubble technology -- General principles for usage and measurement of fine bubbles -- Part 2: Categorization of the attributes of fine bubbles |
|
1 |
|
Fine Bubble Industries Association |
a |
| |
Fine bubble technology -- Sampling and sample preparation for measurement -- Part 1: Ultrafine bubble dispersion in water
|
|
1 |
|
Fine Bubble Industries Association |
a |
| |
Fine bubble technology -- Storage and transportation of ultrafine bubble dispersion in water
|
|
1 |
|
Fine Bubble Industries Association |
a |
| |
Safety of machinery - Relationship with ISO 12100 - Guidance to machinery manufacturers for consideration of related IT-security (cyber security) aspects |
|
1 |
|
The Japan Machinery Federation |
a |
| |
Earth-moving and building construction machinery -- Electromagnetic compatibility (EMC) of machines with internal electrical power supply -- Part 1: General EMC requirements under typical electromagnetic environmental conditions |
|
1 |
|
Japan Construction Machinery And Construction Association |
a |
| |
Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply Part 2: Additional EMC requirements for functional safety |
|
1 |
|
Japan Construction Machinery And Construction Association |
a |
| |
Pneumatic radiant heating and cooling air supply unit |
|
1 |
|
Japanese Standards Association |
a |
| B0955-1 |
Machine tools -Environmental evaluation of machine tools - Part 1:Design methodology for energy-efficient machine tools |
25.080.01 |
2 |
ISO 14955-1 |
Japan Machine Tool Builders’ Association |
a |
| B6034 |
Safety of machine tools - Drilling machines |
25.080.01 |
1 |
|
Japan Machine Tool Builders’ Association |
a |
| B6340-1 |
7/24 taper spindle noses for automatic tool changers - Part 1: Dimensions and designation of spindle noses of forms S and SF |
25.060.20 |
5 |
ISO 9270-1 |
Japan Machine Tool Builders’ Association |
a |
| B6340-2 |
7/24 taper spindle noses for automatic tool changers - Part 2: Dimensions and designation of spindle noses of forms J and JF |
25.060.20 |
5 |
ISO 9270-2 |
Japan Machine Tool Builders’ Association |
a |
| B7997-1 |
Automated concentration monitoring instruments of dust in flue gas-Part 1: Light scattering method
|
13.040.40;71.040.40 |
3 |
|
Japanese Standards Association |
a |
| B7997-2 |
Automated concentration monitoring instruments of dust in flue gas-Part 2: Light transmission method
|
13.040.40;71.040.40 |
3 |
|
Japanese Standards Association |
a |
| B7997-3 |
Automated concentration monitoring instruments of dust in flue gas-Part 3: Toriboelectric measuring method
|
13.040.40;71.040.40 |
3 |
|
Japanese Standards Association |
a |
| B8228 |
Application and installation of safety devices excluding stand-alone bursting disc safety devices |
13.240 |
4 |
ISO 4126-9 |
Japan Valve Manufacturers’ Association |
a |
| B8415-1 |
General safety code for industrial combustion furnaces-Part 1: General requirements |
13.100; 25.180.01 |
2 |
ISO 13577-1 |
Japan Industrial Furnace Manufacturers Association |
a |
| B8415-2 |
General safety code for industrial combustion furnaces-Part 2: Combustion and fuel handling systems |
13.100; 25.180.01 |
2 |
ISO 13577-2 |
Japan Industrial Furnace Manufacturers Association |
a |
| B8415-3 |
General safety code for industrial combustion furnaces-Part 3: Protective systems |
13.100; 25.180.01 |
2 |
ISO 13577-4 |
Japan Industrial Furnace Manufacturers Association |
a |
| B8638 |
Humidity control outdoor air processing machines by heat pump desiccant system |
23.120;27.080 |
4 |
|
Japanese Standards Association |
a |
| B8741-1 |
Fine bubble technology-General principles for usage and measurement of fine bubbles-Part 1: Terminology |
01.040.07;07.030 |
5 |
ISO 20480-1 |
Fine Bubble Industries Association |
a |
| B8751-1 |
Fine bubble technology-Test method of performance using ozone fine bubble water generating system-Part 1: Methylene blue decolourization method |
13.060.25;13.060.30;71.100.99 |
2 |
|
Fine Bubble Industries Association |
a |
| B9441 |
Additive manufacturing-General principles-Vocabulary and fundamental concepts |
01.040.25; 25.030 |
2 |
ISO/ASTM FDIS 52900 |
Technology Research Association for Future Additive Manufacturing |
a |
| B9442 |
Specification of FAV format for 3D models |
35.240.50 |
5 |
|
Gloal FAB Society Consortium |
a |
| W0141 |
Unmanned aircraft - Vocabulary |
01.040.49;49.020 |
5 |
|
Japan Uav Association |
a |
| Y1001 |
Requirements for safety management system of robot service using service robots |
13.110;25.040.30 |
5 |
|
Japan Robot Association |
a |
| Z2205 |
High deformation rate testing by split Hopkinson bar method |
19.060 |
5 |
|
High Pressure Institute Of Japan |
a |
