|
Wind turbines - Part 12-2: Power performance of electricity-producing wind turbines based on nacelle anemometry |
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
|
Instrument Transformers- Part 1:General requirements
|
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
|
Instrument Transformers- Part 2:Additional requirements for current transformers
|
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
|
Instrument Transformers- Part 3:Additional requirements for inductive voltage transformers
|
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
|
Wind energy generation systems - Part 3-2: Design requirements for floating offshore wind turbines |
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
|
Wind energy generation systems-Part 6: Tower and foundation design requirements |
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
|
Superconductivity - Superconducting electronic devices - Generic specification for sensors and detectors |
|
1 |
|
The Japanese Electric Wire & Cable Makers' Association |
b |
|
Measurement methods of energy consumption and calculation methods of facility specifications used to estimate energy consumption for fuel cell power systems |
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
|
Fuel cell technologies-Part 9-101: Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking-Streamlined life-cycle considered environmental performance characterization of stationary fuel cell combined heat and power systems for residential applications |
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
|
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws |
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
|
Rotating electrical machines - Part 30-1: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
|
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
|
Electrical energy storage (EES) systems: Safety requirements for grid-integrated EES systems ? Performing unplanned modification of electrochemical based system
|
|
1 |
|
The Institute of Electrical Engineers of Japan |
b |
|
Active energy testing method for power electronic converter systems and equipment |
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
|
Dielectric and resistive properties of solid insulating materals –Part 2-1: Relative permittivity and dissipation factor –Low frequencies (0,1 Hz to 10 MHz) – AC methods
|
|
2 |
|
※Japanese Standards Association |
b |
|
Dielectric and resistive properties of solid insulating materals –Part 2-2: Relative permittivity and dissipation factor –high frequencies (1 MHz to 300 MHz) – AC methods
|
|
2 |
|
※Japanese Standards Association |
b |
|
Classification of environmental conditions - Part 2-6: Environmental conditions in nature - Earthquake vibration and shock |
|
3 |
|
※Japanese Standards Association |
b |
|
Fire hazard testing-Part 1-11: Guidance for assessing the fire hazard of electrotechnical products ? Fire hazard assessment
|
|
3 |
|
※Japanese Standards Association |
b |
C0364-7-722 |
Low-voltage electrical installations-Part 7-722: Requirements for special installations or locations-Supplies for electric vehicles |
91.140.50;43.120 |
5 |
IEC 60364-7-722 |
Japanese Standards Association |
b |
C2541 |
Thermal measurement method of loss distribution on iron core surfaces by means of an infrared camera |
17.220.20;29.020 |
5 |
|
Japanese Standards Association |
b |
C8995 |
Safety of snow melting photovoltaic (PV) modules - Requirements for construction and testing |
27.160;29.220.99 |
5 |
|
Photovoltaic Power Generation Technology Research Association |
b |
C61558-2-14 |
Safety of transformers, reactors, power supply units and combinations thereof-Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers for general applications |
29.180 |
5 |
IEC 61558-2-14 |
Japanese Standards Association |
b |
C62841-2-1 |
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery-Safety-Part 2-1: Particular requirements for hand-held drills and impact drills |
25.140.20 |
5 |
IEC 62841-2-1 |
The Japan Electrical Manufacturers' Association |
b |
C63277 |
Binary power generation systems with capacity less than 100 kW-Performance test methods |
27.190 |
5 |
IEC 63277 |
Japanese Standards Association |
b |