| |
Optical amplifiers-Test methods-Part 1:Optical power and Parameters |
|
1 |
|
Optoelectronics Industry And Technology Development Association |
b |
| |
Audio/video, information and communication technology equipment- Part 3: Safety aspects for DC power transfer through communication cables and ports |
|
1 |
|
Japan Business Machine And Information System Industries Association |
b |
| |
Dependability management - Guidance for management and application - Open systems dependability |
|
1 |
|
※Japanese Standards Association |
b |
| |
Fiber optic interconnecting devices and passive cmponents - Basic test and measureemnt procedures-Part 2-42: Stregth of optical fiber to device interface - Static side load for strain relief |
|
1 |
|
※Japanese Standards Association |
b |
| |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures-Part 3-54: Examinations and measurements - Angular misalignment between ferrule bore axis and ferrule axes for cylindrical ferrules |
|
1 |
|
※Japanese Standards Association |
b |
| C0806-301 |
Packaging of components for automatic handling-Part 301:Measuring methods of electrostatic potential and charge decay performance while over tape is peeled off from carrier of SMD taping |
31.020;31.240 |
3 |
|
Japan Electronics And Information Technology Industries Association |
b |
| C1006 |
Determination of magnitude of display sparkle
|
17.180.01;17.180.20 |
5 |
|
Japanese Standards Association |
b |
| C5381-31 |
Low-voltage surge protective devices-Part 31:Requirements and test methods for SPDs for photovoltaic installations |
29.240.01; 29.240.10 |
3 |
IEC 61643-31 |
Japan Electronics And Information Technology Industries Association |
b |
| C5381-32 |
Low-voltage surge protective devices-Part 32: Surge protective devices connected to the d.c. side of photovoltaic installations-Selection and application principles
|
29.240.01; 29.240.10 |
3 |
IEC 64643-32 |
Japan Electronics And Information Technology Industries Association |
b |
| C5381-352 |
Components for low-voltage surge protection-Part 352: Selection and application principles for telecommunications and signalling network surge isolation transformers (SITs) |
33.040.99 |
3 |
IEC 61643-352 |
Japan Electronics And Information Technology Industries Association |
b |
| C5630-28 |
Semiconductor devices-Micro-electromechanical devices-Part 28: Performance testing method of vibration-driven MEMS electret energy harvesting devices |
31.080.99 |
3 |
IEC 62047-28 |
Micromachine Center |
b |
| C5630-30 |
Semiconductor devices-Micro-electromechanical devices-Part 30: Measurement methods of electro-mechanical conversion characteristics of MEMS piezoelectric thin film |
31.080.99 |
3 |
IEC 62047-30 |
Micromachine Center |
b |
| C5920-4 |
Fiber optic passive power control devices-Part 4: Single-mode fiber, plug-receptacle style, fixed optical attenuator |
33.180.20 |
5 |
IEC 61753-051-3 |
Optoelectronics Industry And Technology Development Association |
b |
| C5932-1 |
Optical isolator-Part 1: Generic specification |
33.180.20 |
5 |
IEC 61202-1 |
Optoelectronics Industry And Technology Development Association |
b |
| C5954-5 |
Fiber optic active components and devices-Test and measurement procedures-Part 5: Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces |
33.180.20 |
5 |
IEC 62150-3 |
Optoelectronics Industry And Technology Development Association |
b |
| C5964-7-1 |
Fiber optic connector interfaces - Part 7-1: Type MPO connector family (F13 type) - One fiber row |
33.180.20 |
4 |
IEC 61754-7-1 |
Optoelectronics Industry And Technology Development Association |
b |
| C5964-7-2 |
Fiber optic connector interfaces-Part 7-2: Type MPO connector family (F13 type)-Two fiber rows |
33.180.20 |
4 |
IEC 61754-7-2 |
Optoelectronics Industry And Technology Development Association |
b |
| C61300-2-35 |
Fiber optic interconnecting devices and passive components-Basic test and measurement procedures-Part 2-35: Strength of optical fiber to device interface-Cable nutation |
33.180.20 |
3 |
IEC 61300-2-35 |
Optoelectronics Industry And Technology Development Association |
b |
| C62197-1 |
Connectors for electronic equipment-Quality assessment requirements-Part 1: Generic specification |
31.220.10 |
3 |
IEC 62197-1 |
Japan Electronics And Information Technology Industries Association |
b |
| C6950-22 |
Information technology equipment-Safety-Part 22: Equipment to be installed outdoors |
29.020;35.020 |
5 |
IEC 60950-22 |
Japan Business Machine And Information System Industries Association |
b |
