| C0364-7-706 |
Low-voltage electrical installations-Part 7-706: Requirements for special installations or locations-Conducting locations with restricted movement |
91.140.50;29.020 |
2 |
IEC 60364-7-706 |
Japanese Standards Association |
b |
| C0364-7-715 |
Low-voltage electrical installations-Part 7-715: Requirements for special installations or locations-Extra-low-voltage lighting installations |
29.140.50;91.140.50 |
2 |
IEC 60364-7-715 |
Japanese Standards Association |
b |
| C1010-2-201 |
Safety requirements for electrical equipment for measurement, control, and laboratory use
?Part 2-201: Particular requirements for control equipment
|
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
| C1400-24 |
Wind energy generetion systems-Part24:Lightning Protection |
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
| C1609-2 |
Illuminance meters-Part 2: Measuring instruments used in transaction or certification |
17.180.30 |
5 |
|
The Illuminating Engineering Institute Of Japan |
b |
| C2555 |
Electrical strip and sheet for pole core |
29.030;17.220.20 |
2 |
IEC 60404-8-5 |
The Japan Electrical Manufacturers' Association |
b |
| C3010 |
Safety requirements for insulated wires, cables, and heating wires for warm nursery |
29.060.10 |
5 |
|
The Japanese Electric Wire & Cable Makers' Association |
b |
| C3103 |
Annealed Copper Wires for Winding Wires |
|
1 |
|
※Japanese Standards Association |
b |
| C3104 |
Rectangular copper wires for electrical purposes |
|
1 |
|
※Japanese Standards Association |
b |
| C3215-0-6 |
Specifications for particular types of winding wires-Part 0-6: General requirements-Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire |
|
1 |
|
※Japanese Standards Association |
b |
| C3215-2 |
Specifications for particular types of winding wires-Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer |
|
4 |
|
※Japanese Standards Association |
b |
| C3215-31 |
Specifications for particular types of winding wires-Part 31: Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 |
|
1 |
|
※Japanese Standards Association |
b |
| C3215-32 |
Specifications for particular types of winding wires-Part 32: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155 |
|
1 |
|
※Japanese Standards Association |
b |
| C3215-49 |
Specifications for particular types of winding wires-Part 49: Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 |
|
1 |
|
※Japanese Standards Association |
b |
| C3216-1 |
Winding wires-test methods-Part 1:General |
|
4 |
|
※Japanese Standards Association |
b |
| C3216-3 |
Winding wires-Test methods-Part 3:Mechanical properties |
|
4 |
|
※Japanese Standards Association |
b |
| C3662-1 |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -Part1:General requirements |
|
1 |
|
The Japanese Electric Wire & Cable Makers' Association |
b |
| C3662-3 |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 3 : Non-sheathed cables for fixed wiring |
|
1 |
|
The Japanese Electric Wire & Cable Makers' Association |
b |
| C3662-4 |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 4: Sheathed cables for fixed wiring |
|
1 |
|
The Japanese Electric Wire & Cable Makers' Association |
b |
| C3662-5 |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 5: Flexible cables (cords) |
|
1 |
|
The Japanese Electric Wire & Cable Makers' Association |
b |
| C3662-7 |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V - Part 7: Flexible cables screened and unscreened with two or more conductors |
|
1 |
|
The Japanese Electric Wire & Cable Makers' Association |
b |
| C3663-1 |
Rubber insulated cables - Rated voltages up to and including 450/750V - Part 1:general requirements
|
|
1 |
|
The Japanese Electric Wire & Cable Makers' Association |
b |
| C3663-3 |
Rubber insulated cables - Rated voltages up to and including 450/750V - Part 3:Heat resistant silicone insulated cables
|
|
1 |
|
The Japanese Electric Wire & Cable Makers' Association |
b |
| C3663-4 |
Rubber insulated cables - Rated voltages up to and including 450/750V - Part 4:Cords and flexible cables
|
|
1 |
|
The Japanese Electric Wire & Cable Makers' Association |
b |
| C3663-6 |
Rubber insulated cables - Rated voltages up to and including 450/750V - Part 6:Arc welding electrode cables
|
|
1 |
|
The Japanese Electric Wire & Cable Makers' Association |
b |
| C3663-7 |
Rubber insulated cables - Rated voltages up to and including 450/750V - Part 7:Heat resistant ethylene-vinyl acetate rubber insulated cables
|
|
1 |
|
The Japanese Electric Wire & Cable Makers' Association |
b |
| C3663-8 |
Rubber insulated cables - Rated voltages up to and including 450/750V - Part 8:Cords for applications requiring high flexibillity
|
|
1 |
|
The Japanese Electric Wire & Cable Makers' Association |
b |
| C3801-1 |
Testing method for insulators－Part 1 : Insulators for overhead line |
|
1 |
|
Japan Porcelain Insulator Manufacturers' Association |
b |
| C3801-2 |
Testing method for insulators－Part 2 : Post insulators for station |
|
1 |
|
Japan Porcelain Insulator Manufacturers' Association |
b |
| C3801-3 |
Testing method for insulators－Part 3：Hollow insulators |
|
1 |
|
Japan Porcelain Insulator Manufacturers' Association |
b |
| C4213 |
Low-voltage three-phase squirrel-cage induction motors- Low-voltage top runner motor |
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
| C4402 |
Thyristor rectifiers for floating charge |
|
3 |
|
※Japanese Standards Association |
b |
| C4411-3 |
Uninterruptible power systems (UPS)- Part 3: Method of specifying the performance and test requirements |
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
| C4413 |
Criteria for low voltage electrical energy storage equipment |
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
| C4414 |
Lavelings for low voltage electrical energy storage equipment for residential use |
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
| C4605 |
AC load break switches for rated voltages above 1 kV up to and including 52 kV |
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
| C4610 |
Circuit-breakers for equipment (CBE) |
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
| C7709-1 |
Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps |
|
1 |
|
※Japanese Standards Association |
b |
| C7709-2 |
Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders |
|
1 |
|
※Japanese Standards Association |
b |
| C7709-3 |
Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges |
|
1 |
|
※Japanese Standards Association |
b |
| C8105-2-22 |
Luminaires-Part 2-22: Particular requirements-Luminaires for emergency lighting |
29.140.40 |
2 |
IEC 60598-2-22 |
Japan Lighting Manufacturers Association |
b |
| C8121-1 |
Miscellaneous lampholders-Part 1: General requirements and tests |
29.140.10 |
2 |
IEC 60838-1,IEC 60838-1 Amendment 1,IEC 60838-1 Amendment 2 |
Japan Lighting Manufacturers Association |
b |
| C8147-2-1 |
Controlgear for electric light sources - Safety - Part 2-1 : Particular requirements - Starting devices (other than glow starters) |
|
1 |
|
Japan Lighting Manufacturers Association |
b |
| C8147-2-3 |
Controlgear for electric light sources - Safety－Part 2-3：Particular requirements for - AC or DC supplied electronic controlgear for fluorescent lamps |
|
1 |
|
Japan Lighting Manufacturers Association |
b |
| C8147-2-7 |
Lamp controlgear-Part 2-7: Particular requirements for electric source for safety services (ESSS) supplied electronic controlgear for emergency lighting |
29.140.99;29.140.40 |
2 |
IEC 61347-2-7,IEC 61347-2-7 Amendment 1,IEC 61347-2-7 Amendment 2 |
Japan Lighting Manufacturers Association |
b |
| C8147-2-8 |
Controlgear for electric light sources - Safety - Part 2-8：Particular requirements - Ballasts for fluorescent lamps |
|
1 |
|
Japan Lighting Manufacturers Association |
b |
| C8147-2-9 |
Controlgear for electric light sources - Safety - Part 2-9：Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) |
|
1 |
|
Japan Lighting Manufacturers Association |
b |
| C8147-2-12 |
Controlgear for electric light sources - Safety - Part 2-12: Particular requirements for DC or AC supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) |
|
1 |
|
Japan Lighting Manufacturers Association |
b |
| C8201-4-1 |
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
|
1 |
|
The Japan Electrical Manufacturers' Association |
b |
| C8201-4-2 |
Low-voltage switchgear and controlgear-Part 4-2: Contactors and motor-starters-Semiconductor motor controllers, starters and soft-starters |
29.130.20 |
5 |
IEC 60947-4-2,IEC 60947-4-2 Amendment 1 |
The Japan Electrical Manufacturers' Association |
b |
